Rigger Job Description

Question

Rigger Job Description

Job summary 1

The Rigger is responsible for the preparation, rigging, and testing of the boats. They contribute to the customer’s delight and satisfaction by confirming the boats are ready for delivery.

Duties & Responsibilities 1

special offer

Download all 10 Rigger Job Descriptions

100Hires
eBook

Free Guide:

The Ultimate guide
to recruiting

Requirements & Skills 1

Must have own hand tools, boat or car engine experience
Lift 10 lbs infrequently, Standing, Climbing, Constant use of Hands, Outdoors

Job summary 2

Under general supervision, the Rigger uses and handles rigging equipment and gear in moving, lashing, and securing heavy objects such as machines, and/or members of structures; performs related work.

Duties & Responsibilities 2

Arranges to raise and lower safely all types of materials, machines, and/or equipment to and from working platforms, trucks, streets, floors, and other levels in structures or vessels.
Inspects, tests, and maintains all types of rigging equipment such as planks, fiber ropes, wire ropes, chains, swing scaffolds, etc.
Rigs all types of working platforms, swing scaffolds, and bosun chairs.
Rigs and uses all types of hoisting equipment such as shear logs, catheads, gin poles, forklifts, and similar equipment, and for those holding a valid State Department of Buildings Machine Hoisting License Class C (or higher), may be asked to operate the Cherry Picker for rigging purposes.
Uses jacks, rollers, and skids in the moving of heavy equipment and structural members.
Splices wire rope; splices and ties knots in fiber ropes.
- Handles mooring lines and gangways.
- Uses Dynamometer for strength testing slings, straps, etc.
- Keeps work records, inspection reports, and certificates as required.

Requirements & Skills 2

Five years of full-time experience acquired within the last ten years as a Rigger doing the work outlined under Duties and Responsibilities.
- Under general supervision uses and handles rigging equipment ladders, and gear in moving, lashing, and securing heavy objects such as machines, and/or members of structures; performs related work.
- For appointments in DOT, a motor vehicle driver's license valid in the State is required, and must be maintained for the duration of employment.
- Candidates must pass a drug screening to be appointed. Riggers are subject to random drug and alcohol testing during their employment.

Job summary 3

The Rigger works in the field, installing rigging systems and related equipment assemblies such as chain motors, curtains, winches, pipe battens, etc.

Duties & Responsibilities 3

Responsible for performing installation and fabrication of rigging hardware, battens, curtain tracks, electrical plug boxes/strips, and all related items.
Installations require the rigger to work at heights ranging from twelve to sixty feet from floor level, and may often call for the use of safety equipment and climbing.
- While much of the work involves individual initiative and judgment, working with team members is critical when performing rigging installation.
- Specific work will include the installation of hardware to existing structures, the installation of hanging pipes, beams, or tracking, and hardware to concrete, steel, wood, and block walls.
- Responsible for drilling, securing and testing the operation of head blocks, mule blocks, sheaves, winches, and components of counterweighted, winched, and dead-hung systems.

Requirements & Skills 3

Knowledge of theatrical rigging practices and procedures.
Certification or ability to obtain certification: ETCP Arena Rigging, ETC Prodigy.
Ability to recognize, tie and determine the use of knots and cabling terminations.
Basic math skills, including but not limited to addition, subtraction, division, and multiplication.
- Knowledge of safe climbing skills and practices including the ability to rappel, belay, and ascend.
- Ability to work with or without supervision.
- Use authoritative references and "common sense" judgment when making decisions regarding safe rigging practices and procedures.

Job summary 4

The Rigger facilitates the installation of fixed scaffolding and swing stage scaffolding at the request of customers by performing the following duties.

Duties & Responsibilities 4

Load trucks from Company with proper materials for the job as directed.
Transport equipment to and from worksites in Company owned vehicles.
Erect scaffold as directed by Foreman or Construction Manager.
Assist in the movement of equipment on and off the truck and to the job site.
- Set up equipment using hand and power tools with the guidance of a Foreman or Construction Manager.
- Align, level, and anchor equipment.
- Dismantle and store equipment after use.

Requirements & Skills 4

Job summary 5

The Rigger assists employees or clients in loading material, equipment, and supplies in a safe manner.

Duties & Responsibilities 5

Attaches loads to rigging to provide support or prepare them for moving, using hand and power tools.
Controls the movement of heavy equipment or material through narrow openings or confined spaces.
Dismantles and stores rigging equipment after use.
Manipulates rigging lines, hoists, and pulling gear to move or support equipment or materials.
- Signals or verbally directs individuals engaged in hoisting and moving loads to ensure the safety of workers and materials.
- Routinely tests rigging equipment to ensure safety and reliability.
- Maintains clean work areas and practices good housekeeping.

Requirements & Skills 5

At least 2 years of rigging experience in offshore locations.
TWIC is required to work on offshore locations.

Job summary 6

A Rigger is responsible for setting up heavy lifting equipment and safely securing it in place using pulleys, ropes, and hoists. Performs manual labor during operations.

Duties & Responsibilities 6

Assemble rigging to lift and move equipment or material
Safely signal crane operators engaged in hoisting and moving loads to ensure the safety of workers and materials
Inspect rigging to ensure safety and reliability
Safely use tools such as pulleys, ropes, and hoists to move equipment
Secure equipment safely
- Rig heavy equipment
- Manual laborer as needed
- Follows company and work site safety policies/procedures and commits to an “Incident and Injury Free” work environment

Requirements & Skills 6

0-2 years of crane rigging experience
High School diploma or equivalent required
Must be able to tolerate rough seas, vibrations, heat, harsh weather conditions, confined spaces, and high noise levels
- Must be able to lift or carry miscellaneous equipment, supplies, and parts up to 50 lbs. unassisted
- While performing the duties of this job, the employee is regularly required to stand, walk, climb, kneel, crawl, stoop, and/or sit.
- Work will frequently require individuals to push, pull, bend, or stand for long periods, and climb ladders that have capacity limits of 300 lbs.

Job summary 7

Under close supervision, the Rigger alters, and repairs patterns; and performs other related duties as assigned.

Duties & Responsibilities 7

Set up patterns for production based on production requirements;
Change pattern flanges including altering gating, walls, and risers to meet specifications;
Repair patterns as needed;
- Locate and retrieve patterns, jackets, gating walls, and core and drag boxes;
- Regular punctuality, attendance, and absence reporting in conformance with company policies is essential to the successful performance of this position; and
- Fully comply with company rules, policies, procedures, and safety guidelines to ensure safe and effective operations.

Requirements & Skills 7

Job summary 8

The Rigger must know about complex rigging, heavy rigging, change crane boom and cable, electrical safety, ladder, and scaffold safety, introduction to lifting machinery, wire rope basics, basic rigging, fire prevention, sizing of chokers, load charts, cutting torches, and basic knowledge of blueprint reading. It is highly recommended that all riggers obtain a certification from a nationally recognized organization such as, but not limited to NCCER. Must learn and understand all safety hazards related to the work and learn to safely and effectively use or operate work-related tools and equipment. Will be required to work in a plant operations or construction job site setting.

Duties & Responsibilities 8

Load, transport, unload, and assists in selecting cables, ropes, pulleys, winches, blocks, and sheaves, according to the weight and size of load to be moved
- Signal or verbally direct workers engaged in hoisting and moving loads, to ensure the safety of workers and materials
- Perform minor maintenance or cleaning activities of tools and equipment
- Assist other craft workers as needed

Requirements & Skills 8

Job summary 9

The Rigger sets up or repairs safely rigging for construction projects.

Duties & Responsibilities 9

Align, level, and anchor machinery
Attach loads to rigging to provide support or prepare them for moving, using hand and power tools.
Attach pulleys and blocks to fixed overhead structures such as beams, ceilings, and gin pole booms, using bolts and clamps.
Control movement of heavy equipment through narrow openings or confined spaces, using chain falls, gin poles, gallows frames, and other equipment.
Dismantle and store rigging equipment after use.
- Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
- Climb ladders to measure and/or inspect the product.
- Work with Crane Operator through great communication to ensure safe movement and passage.

Requirements & Skills 9

The ability to climb, lift, balance, bend, stretch, twist, or reach with your body, arms, and/or legs
Push and Pull 30 lbs
- Lift 50 lbs
- Be on Feet 8 to 12 hours shifts
- The ability to keep or regain your body balance or stay upright when in an unstable position

Job summary 10

The Rigger is responsible for the inspection, maintenance, and quality of all lifting gear used for the movement of commodities by crane to or from marine vessels. Assure the work being performed and equipment used meets Company's safe working standards.

Duties & Responsibilities 10

Requirements & Skills 10

Frequently asked questions

What are the skills of a rigger?

answer

What are the daily duties of a rigger?

answer

We use cookies to offer you our service. By continuing to use this site, you consent to our use of cookies as described in our policy