Fabricator Job Description template and pdf with duties [2024]

Job summary 1

Fabricators perform tasks that are generally routine and manual with high attention to detail. Delivers high-quality products. Builds positive relationships with others to achieve common goals. Manages time, to ensure being at work on time and effectively getting the job done.

Duties & Responsibilities 1

special offer

Download PDF with all 10 Fabricator Job Descriptions

100Hires
eBook

Free Guide:

The Ultimate guide
to recruiting

Responsible for daily production of a Robotic welding cell with a heavy emphasis on Safety, Quality, and throughput.
- Prior welding experience preferred, but not required.
- Operates metal fabrication equipment.
- Makes shop aids such as stops, guides, feeding aids, and blocks to facilitate machine operations.

Requirements & Skills 1

High school diploma or equivalent.
Willingness and ability to work extended workweeks including weekends.
Willingness to follow all safety rules.
Able to follow tasks to build products and use detailed guidelines to aid in decision-making.
- Capability to meet production goals with a desire to exceed them.
- Reliable and dependable- by being on time for scheduled shifts, meetings, and training.
- Manufacturing experience is not required however preferred

Job summary 2

The Fabricator performs tasks such as assembling cables and removing and replacing defective components, modules, and assemblies that have been identified as being defective.

Duties & Responsibilities 2

Qualified candidates will be subject to a virtual evaluation to determine eligibility.
Reads, understands, and interprets drawings and blueprints and fabricates and repairs electronic components by drawings, standard work documents, technical reference orders, technical manuals, technical orders, etc.
Uses common hand tools such as wire cutters, strippers, crimpers, and heat guns.
Works independently on routine and repetitive assignments such as maintaining, troubleshooting, testing, and repairing problems in single-layered printed circuit cards, and other equipment that is of limited design and functional complexity
Applies basic and some advanced technical knowledge to solve unusually complex problems that typically cannot be solved solely by referencing manufacturers' manuals or similar documents including determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering changes.
- Requires a detailed understanding of the interrelationships of circuits and judgment in planning work sequence, selecting tools, and testing instruments, and is reviewed for compliance with accepted practices.
- Work may be reviewed by the Supervisor for general compliance with accepted practices.
- This technician works under immediate supervision and achieves technical guidance, as required, from the supervisor or higher-level technician.

Requirements & Skills 2

Must be willing to work shifts or weekends.
High school diploma or general education degree (GED) is required.
Minimum one (1) year of experience required.
Must be able to solder and be IPC Certification ready.
Must have basic knowledge of Electronics Theory and applications, must be able to fabricate and overhaul cable assemblies, including but not limited to the assembly of cable wires and connecting cable wires to connector pins, switch boxes, and power distribution boxes.
- Thorough knowledge of technical publications related to aircraft and missile electronics maintenance is mandatory.
- Must be able to follow both written and oral instructions and have knowledge of the scopes and limitations of various categories of electronic maintenance (related maintenance functions) and their applications to the contract unit.
- Must be capable of using and reading blueprints, wiring diagrams, and data tables.

Job summary 3

We have an immediate opportunity for a Fabricator to support our manufacturing operation. This is a full-time position with great benefits including but not limited to Health Insurance, 401K Plan, Paid Vacation/Sick time, and so much more. The ideal candidate will have the skills and experience necessary to fabricate steel parts and tools using a variety of machines.

Duties & Responsibilities 3

Requirements & Skills 3

Prior experience operating a Press Brake and/or Shear. Set-up experience a plus
Understanding of basic CNC controls
1+ years prior production experience preferred
Ability to read blueprints and measuring tape
- Basic math and problem-solving skills (add, subtract, multiply, and divide into all units of measure)
- Experienced in a fast-paced production environment
- Able to pass all EHS required tests and clearances

Job summary 4

The Fabricator manufactures customized products that meet customer specifications and prepare completed orders for shipment.

Duties & Responsibilities 4

Examines specifications of the customer's order using drawings, work orders, or blueprints to determine the characteristics of the finished item, materials to be used, and machine setup requirements.
Fabricates workpiece as determined by work order specifications. Retrieves correct materials and performs various fabrication duties.
Examines work pieces visually, by touch, or using tape rules, calipers, or gauges to ensure the product meets desired standards.
Packages for shipping. Installs protective devices, such as bracing, padding, or strapping, to prevent shifting or damage to items being transported.
- Maintains condition of work area (i.e., free of trash, product in the correct location, etc.).
- Follows company safety policies and procedures.
- Performs other duties as assigned.

Requirements & Skills 4

Must be a minimum of 18 years of age or older.
Must pass pre-employment assessment(s) if applicable.
HS Diploma or GED strongly preferred.
- 0-2 years of experience in the area of responsibility.
- Experience with fabrication shop equipment.
- Metal working experience preferred.

Job summary 5

Fabricator sets up and aligns parts per blueprint in preparation for welding and completed fabrication of product.

Duties & Responsibilities 5

Perform job duties safely to conform to our safety program.
Reference the blueprint and confer with the Lead person to determine job requirements.
Gather necessary materials and perform layout per specifications.
Set up the welding machine and adjust the settings.
Position, clamp, and/or tack weld as needed before beginning the welding process.
Visually examine welds for adherence to quality standards; re-weld defective joints and remove surplus slag, flux, and spatter using a brush, pad, buffer, and/or grinder
- Operate cutting torch and manual plasma cutter as needed.
- Notify the Lead person or Inspector when the product is ready for inspection.
- Perform ongoing housekeeping duties to keep the work area clear of scrap and debris.

Requirements & Skills 5

Equipment Used: A cutting torch, manual plasma cutter, brush, pad, buffer, grinder, overhead crane, ratchet straps, rubber hammer, tape measure
Certificates, licenses, and registrations: Welding certification is preferred but not required. Ability to obtain and maintain forklift truck license preferred.
- Knowledge/Skills: Able to read tape measure and blueprints. Must be trained in applicable SOPs (Standard Operating Procedures) and work instructions, if any.
- Education/Experience: High school diploma or equivalency (GED) preferred, but not required
- Language Skills: Able to read and comprehend simple or somewhat complex instructions. Able to write notes or simple correspondence. Able to effectively communicate information to coworkers.

Job summary 6

The Fabricator provides fabrication support on 2nd or 3rd shift.

Duties & Responsibilities 6

Requirements & Skills 6

High school diploma or equivalent

Job summary 7

Fabricator is responsible for fabricating activities under the direction of the Fabrication Foreman, including but not limited to welding, shearing, bending, burning, and machine maintenance.

Duties & Responsibilities 7

Performs fabricating activities as required to meet production schedules.
Perform duties and activities safely and efficiently.
Communicates departmental information to Fabrication Foreman daily or as needed.
Responsible for maintaining equipment, including routine and preventative maintenance.
- Operation of overhead cranes and forklifts.
- Responsible for keeping a neat and organized work area.
- Other duties as assigned.

Requirements & Skills 7

Welding and fabrication skills
Ability to read, interpret, and fabricate according to blueprints
Communication (including both written and verbal)
Willingness to follow both instructions and direction
Show proficiency in basic mathematics and have the ability to read measuring equipment (tape measure, square, etc.)
- Ability to perform all essential functions of this job
- Welding degree preferred, but not required
- Lifting a maximum of 50 pounds

Job summary 8

The Fabricator performs help At the moment in the facility that may include saws, elumatec, shrink wrap machine, and hardware application for doors and frames by performing the following duties.

Duties & Responsibilities 8

Requirements & Skills 8

One to six months of related work experience is preferred.
Ability to read, analyze, and interpret documents such as, operating and maintenance instructions, safety rules, and procedure manuals. Hardware templates and D/op drawings
JDE experience order status, Boxing, closing work orders
Ability to write routine reports and correspondence
Ability to effectively communicate with other employees and supervisors.
Ability to count, add, subtract, and multiply simple numbers.
- Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
- Ability to deal with and respond to minor problems in standard work situations.
- Ability to measure to 1/32 of an inch.

Job summary 9

The Fabricator must perform tasks involving physical labor for the operation and set up of the various welding equipment. May also operate a variety of other equipment including, but not limited to; hand, power tools, or other machinery. The Fabricator works to draw tolerances and may be responsible for the inspection of their work. The Fabricator is expected to keep their work area safe and free of hazards.

Duties & Responsibilities 9

Requirements & Skills 9

Meet medical, drug, and alcohol qualifications
- Ability to operate in a machine/fabrication shop environment up to 12 hours per day, 40-50 hours per week
- Majority of work requires standing or walking, bending, stooping, and minimal climbing
- Handle material weighing up to 50 pounds with minimal assistance

Fabricator Job Description

Job summary 1

Duties & Responsibilities 1

Requirements & Skills 1

Job summary 2

Duties & Responsibilities 2

Requirements & Skills 2

Job summary 3

Duties & Responsibilities 3

Requirements & Skills 3

Job summary 4

Duties & Responsibilities 4

Requirements & Skills 4

Job summary 5

Duties & Responsibilities 5

Requirements & Skills 5

Job summary 6

Duties & Responsibilities 6

Requirements & Skills 6

Job summary 7

Duties & Responsibilities 7

Requirements & Skills 7

Job summary 8

Duties & Responsibilities 8

Requirements & Skills 8

Job summary 9

Duties & Responsibilities 9

Requirements & Skills 9

Job summary 10

Duties & Responsibilities 10

Requirements & Skills 10

Start Using
100hires for Free

Weekly Webinars

Fabricator Job Description

Job summary 1

Duties & Responsibilities 1

Requirements & Skills 1

Job summary 2

Duties & Responsibilities 2

Requirements & Skills 2

Job summary 3

Duties & Responsibilities 3

Requirements & Skills 3

Job summary 4

Duties & Responsibilities 4

Requirements & Skills 4

Job summary 5

Duties & Responsibilities 5

Requirements & Skills 5

Job summary 6

Duties & Responsibilities 6

Requirements & Skills 6

Job summary 7

Duties & Responsibilities 7

Requirements & Skills 7

Job summary 8

Duties & Responsibilities 8

Requirements & Skills 8

Job summary 9

Duties & Responsibilities 9

Requirements & Skills 9

Job summary 10

Duties & Responsibilities 10

Requirements & Skills 10

Start Using 100hires for Free

Weekly Webinars

Start Using
100hires for Free