Pipe Fitter Job Description

Question

Pipe Fitter Job Description

Job descriptions
Trades and Services

Job summary 1

The Pipe Fitter is responsible for assembling, laying out, installing, and maintaining pipe systems on steam, fluid, or gas systems. The pipe systems may include but are not limited to pipe, flanges, supports, valves, gauges, hangars, and angles. Pipe Fitters may work on all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and at heights.

Duties & Responsibilities 1

special offer

Download PDF with all 10 Pipe Fitter Job Descriptions

100Hires
eBook

Free Guide:

The Ultimate guide
to recruiting

Requirements & Skills 1

Job summary 2

A Pipe Fitter supervises and coordinates activities of workers engaged in fabricating, assembling, installing, and maintaining piping, fixtures, and equipment for gas, steam, hot water, fire sprinkler system, or oil heating, cooling, lubricating, and industrial processing systems.

Duties & Responsibilities 2

Requirements & Skills 2

Must be at least 18 years of age.
Must pass written PF test.
Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor.
Utilize basic math, a blue book, and a calculator to solve geometric problems associated with Pipe Fitting.
- Must be able to lift up to 50 pounds, climb, bend, twist, stand, and reach repetitively, operate moving equipment, and work in hot/cold/damp/cramped environments.
- Must be willing to work outside of the craft.
- Candidate may be required to pass a drug test and criminal background check based on job location/requirements.

Job summary 3

As a Pipe Fitter, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world.

Duties & Responsibilities 3

Plumbing - Pipe Fitting, Fabrication, Repair, Welding, Modification & Installation to Facility & Production equipment, (including Facility Plumbing Systems as necessary).
- Troubleshooting and solving Plumbing - Pipe Fitting equipment problems.
- Work on low/high-pressure steam, compressed air, gas, water, and process/solvent piping. This includes working from prints, working with outside vendors, determining supplies needed, ordering parts, and working from heights. Perform preventative routes, establish, and maintain equipment documentation, set up and maintain equipment spare parts, and perform root cause failure analysis. Use of PC Maint. Management system tools for analysis, planning & scheduling.
- Provide team support to internal customers.

Requirements & Skills 3

One (1) year Technical Degree Diploma or Certificate (completed and verified before start), in Plumbing, Pipe Fitting, or Steam Fitting from an accredited institution OR Journeyman's License recognized by the State related to this trade (documentation of license will be required).
Must be able to read and interpret blueprints and prefer knowledge of symbols for this craft. Possess good customer relations and effective communication skills (including basic PC use).
- Pass internal Plumbing - Pipe Fitting Skills Assessment.
- A Fabrication work sample will be administered for fabrication competency.
- This position will require staying current with 3M standards & government codes for Pipe Fitting / Plumbing through any necessary training.

Job summary 4

We are looking for a Pipe Fitter who specializes in installing, building, and repairing piping systems, ensuring that materials flow between an origin and their destination safely and without any leaks. Our Pipe Fitters are generally responsible for the smooth operation of the pipework and must be able to understand blueprints and install pipes correctly, understanding the sometimes dangerous nature of the chemicals that the pipes they create are transporting.

Duties & Responsibilities 4

Inspect the worksite to determine the presence of obstructions and ascertain any weaknesses
Plan installation or repair work, avoiding obstructions
Cut, thread, and bend pipe
Install and assemble a variety of metal and non-metal pipes, tubes, and fittings
Connect pipes
Secure pipes to structure
- Install and maintain hydraulic and pneumatic components of machines and equipment
- Increase pressure in the pipe system, observing the connected pressure gauge, to test for leaks in the system
- Observe production machines to detect machinery malfunctions

Requirements & Skills 4

Job summary 5

The Pipe Fitter will work with an elite team of other pipe fitters, technicians, and welders to rapidly build the propulsion systems for the vehicles.

Duties & Responsibilities 5

Collaborate with the area lead to ensure the proper call-out, material, and sizing are accurately assessed for each project
Analyze drawings and specifications to plan fitter operations/steps where procedural information might not be available
Make a continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly
Fitting of all sizes and piping on various small and large assemblies
Effectively communicate with management/supervisor, engineering staff, and planners to achieve build efficiency
- Check work after completion of each operation in job and/or completed job to ensure it is complete and correct per drawing
- Handle and dispose of hazardous materials in an approved manner
- Operate shop equipment as needed and required (forklift, boom lifts, scissor lifts, etc.)

Requirements & Skills 5

5+ years of experience with fitting stainless pipe, 2", 3", 6", 10"
Proficient in the use of bevelers, threaders, and other end prep machines
Working knowledge of pipe-fitting techniques and methods
Ability to add, subtract, multiply, and divide whole numbers and fractions rapidly and accurately
Ability to pass the pipe fitter test; written and hands on this will be performed on site
- Ability to work multiple shifts and change shifts with minimal notice
- Ability to stand for extended periods – 8 hours minimum
- Ability to lift heavy objects (up to 25 lbs.) unassisted

Job summary 6

The Pipe Fitter is responsible for laying out, assembling, installing, and maintaining pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems, applying knowledge of system operation, and following blueprints.

Duties & Responsibilities 6

Requirements & Skills 6

Must be at least 18 years of age.
Must pass written Pipe Fitter test.
Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor.
Utilize basic math and a calculator to solve geometric problems associated with Pipe Fitting.
- Must be able to lift up to 50 pounds, climb, bend, twist, stand, and reach repetitively, operate moving equipment, and work in hot/cold/damp/cramped environments.
- Must be willing to work outside of the craft.
- Candidate may be required to pass a drug test and Criminal background check based on job location/requirements.

Job summary 7

We are looking for a Pipe Fitter that will assemble, layout, install and maintain pipe systems.

Duties & Responsibilities 7

Requirements & Skills 7

Job summary 8

The Pipe Fitter will be able to lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems. Other duties may be assigned.

Duties & Responsibilities 8

Requirements & Skills 8

Education: no minimum education requirements.
Experience: 3-5 years of Journeyman level experience.

Job summary 9

We are currently accepting applications for a Pipe Fitter.

Duties & Responsibilities 9

Lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, industrial production, sanitary systems, and processing systems.
- Install, assemble, and weld HDPE piping.
- Position required frequently lifting to 50 lbs and working in confined environments.
- Must adhere to safety protocol, and work in a drug-free environment.

Requirements & Skills 9

3 years of Commercial Construction Pipefitter experience preferred
Must be able to lift up to 50 lbs
Must be able to work in confined environments

Job summary 10

We are searching for a Pipe Fitter.

Duties & Responsibilities 10

Manufacture and fabricate finished metal products
Install and repair various equipment and components
Trained to install piping - must be plumb, level, and square with proper bracketing
Follow blueprints to meet product specifications
- Calculate material measurements to verify specifications
- Conduct tests to evaluate weld quality and tolerance
- Able to work at heights

Requirements & Skills 10

Previous experience in welding, manufacturing, or other related fields
Familiarity with welding tools and procedures
- Familiarity with engineering blueprints and schematics
- Must be able to pass a hair follicle drug test
- Must have a TWIC card OR be able to pass a background check to get a TWIC card

Frequently asked questions

What does a pipe fitter do daily?

A pipe fitter is a skilled tradesperson who installs and repairs piping systems for various applications, including heating, cooling, and plumbing. Some of the common tasks that a pipe fitter may perform daily include:

Reading and interpreting blueprints and other technical diagrams

Cutting and shaping pipes to fit required dimensions and specifications

Installing piping systems using a variety of tools and techniques

Testing piping systems for leaks and other defects

Repairing or replacing damaged or faulty piping components

Collaborating with other tradespeople and contractors on construction or repair projects.

What skills do you need to be a pipe fitter?

To become a pipe fitter, you typically need to complete an apprenticeship program or technical training in pipe fitting. Some of the key skills and qualifications that are typically required for a career in pipe fitting include:

Technical knowledge of piping systems, including the different types of pipes, fittings, and valves

Proficiency in reading and interpreting blueprints, technical diagrams, and other construction plans

Knowledge of safety procedures and regulations related to pipe fitting work

Physical strength and dexterity to handle and manipulate pipes and fittings

Strong problem-solving and critical thinking skills to troubleshoot and resolve issues with piping systems

Good communication skills to collaborate effectively with other tradespeople and contractors

Attention to detail and accuracy in measuring, cutting, and shaping pipes

Familiarity with tools and equipment used in pipe fitting, such as welding machines, saws, and pipe cutters.

Olivia Powell
Recruiting expert

Last updated Sep 30

Weekly Webinars

Get started with 100Hires

We use cookies to offer you our service. By continuing to use this site, you consent to our use of cookies as described in our policy

Pipe Fitter Job Description

Job summary 1

Duties & Responsibilities 1

Requirements & Skills 1

Job summary 2

Duties & Responsibilities 2

Requirements & Skills 2

Job summary 3

Duties & Responsibilities 3

Requirements & Skills 3

Job summary 4

Duties & Responsibilities 4

Requirements & Skills 4

Job summary 5

Duties & Responsibilities 5

Requirements & Skills 5

Job summary 6

Duties & Responsibilities 6

Requirements & Skills 6

Job summary 7

Duties & Responsibilities 7

Requirements & Skills 7

Job summary 8

Duties & Responsibilities 8

Requirements & Skills 8

Job summary 9

Duties & Responsibilities 9

Requirements & Skills 9

Job summary 10

Duties & Responsibilities 10

Requirements & Skills 10

Frequently asked questions

What does a pipe fitter do daily?

What skills do you need to be a pipe fitter?

Start Using 100hires for Free

Weekly Webinars

Start Using
100hires for Free