Electronics Engineer Job Description template and pdf with duties [2024]

Job summary 1

Currently we are seeking an Electronics Engineer to participate in the development and testing of the next generation of space power hardware. As an Electronics Engineer in this group, you will lead teams designing and testing electronics subsystems and support equipment and will be involved in all aspects of power electronics development from concept to delivery. You will work closely with Power Electronics Cognizant Engineers, Senior Design Engineers, Systems Engineers, and the Technical Group Supervisors.

Duties & Responsibilities 1

special offer

Download PDF with all 10 Electronics Engineer Job Descriptions

Join our webinar: How to improve your recruitment strategy with 100Hires

Lead the development of power electronics systems, guiding architectural and design choices, understanding systems needs and insuring suitability of the design for the application.
Work with other specialists to solve technical problems as they arise, both during the initial design stage and during laboratory testing.
- Develop engineering documentation, such as test procedures, analyses, engineering drawings, and review products, including presentations.
- Work effectively with section and project management to present and status progress on power electronics systems.
- Understand and ensure that appropriate procedures are followed when delivering flight hardware.

Requirements & Skills 1

Bachelor’s degree in Electrical Engineering, or related technical subject area with typically a minimum of 9 years of related experience, or Master’s degree in similar disciplines with typically a minimum of 7 years of experience, or Ph.D. in similar disciplines with typically a minimum of 5 years of experience.
Experience leading teams designing, testing, and delivering electronic systems.
Experience in the design, development, fabrication, assembly and test of power electronics or analog hardware, particularly focused on power systems and analog electronics in space environments.
Experience in the use of computer aided engineering tools to support the electronics design process.
Knowledge of software for computation and simulations associated with electronics development and/or test.
- Good oral and written communications skills.
- Validated ability to multi-task with an established track record of meeting schedule landmarks.
- Ability to lead testing and debugging of circuits in the lab.

Job summary 2

We are seeking an Electronics Engineer to support satellite assembly, test & launch processing, electronics equipment assembly & test and operations & maintenance (O&M) of ground support equipment (GSE). You will provide engineering support to the Ground Operations group to accomplish assembly, integration & test of electronic/electrical ground and flight subsystems and systems.

Duties & Responsibilities 2

Perform manufacturing liaison engineering
Lead the operation & maintenance of ground support equipment
Perform satellite launch processing operations while undergoing rigorous training for and becoming a certified test conductor (CTC)
Perform test procedures development & execution
Lead fault isolation and troubleshooting efforts
- Act as test engineer for electronic/electrical payload processing, cable/chassis/console assembly per engineering drawings, etc.
- Communicate well and work with technicians, quality inspectors, and various engineering disciplines (quality, safety, design), planners, management and customers
- Perform daily duties as required such as production support, technical & status briefings, trade studies, prepare technical analysis/reports, failure analysis and occasional electrical/electronics design

Requirements & Skills 2

Bachelors degree from an accredited college (Electronics Engineering, Electrical Engineering or a related discipline preferred) or equivalent experience/combined education
Must be a US citizen
Candidate selected must have the ability to obtain a TS/SCI Clearance which is required for this role.
Test procedure writing & test operations experience, technical presentation, failure analysis, troubleshooting. Aircraft, missile, rocket and/or satellite assembly and test experience.
Able to perform basic electronics test engineering functions (lead technicians in assembly, operations and maintenance of ground systems, perform troubleshooting/fault detection, failure analysis and corrective actions).
- Must have the ability to work in teams, climb stairs, work in factory & launch site environments.
- Must be willing to travel, work overtime, support odd shifts.
- Excellent communications (written, verbal and presentation) skills are a must.

Job summary 3

In this exciting Electronics Engineer role, you will support our partner scientific divisions in developing electronics readout systems for leading edge experiments and scientific research. You will focus on electronics designs for a variety of different types of detectors and data acquisition readout systems. Your assignments will primarily range from electronics circuit simulation, design, layout and fabrication, circuit debugging, test stand development for data acquisition systems for scientific applications.

Duties & Responsibilities 3

Design and simulate electronic circuits and printed circuit boards for sensor data acquisition (DAQ) systems, including those that incorporate custom ASICs developed by the IC group at LBL.
Develop test stands, test, debug and validate circuit designs for DAQ systems and custom ASICs.
Document ongoing and completed work and present it at conferences and workshops as opportunities arise.
Interact with a broad range of engineers, scientists, students, post-docs, technicians, and administrative staff.
Lead engineering associates and technicians; provide oversight on their work to assure that task completion is timely and of quality.
- Design and implement FPGA-based systems through modeling, firmware development, and testing in support of the many activities in the division and at the laboratory.
- Supervise and provide daily guidance to students and interns.
- Support the preparation of new proposals, from the development of technical concepts to the preparation of budgets and schedules.

Requirements & Skills 3

Job summary 4

As an Electronics Engineer on the Power team you will leverage your experience to design and build space compatible power systems. This may include but is not limited to: simulating circuits, designing, research and development to propose systems, revising existing designs, and ownership of hardware while performing validation testing.

Duties & Responsibilities 4

Manage and control key components such as solar panel arrays, power regulation and distribution, and high-density batteries
Integrate these systems into the spacecraft by working closely with the engineering team
Assist in recruiting, interviewing, and hiring additional teammates to our rapidly-growing team.

Requirements & Skills 4

B.S. or M.S. in Electrical Engineering or similar technical degree
- A passion for hardware development, including working in a fast-paced environment and hands-on design and development
- Experience in designing, building, and testing analog and digital circuits
- EMI/EMC experience

Job summary 5

As a result of our continuing growth, we require an Electronics Engineer as part of The Systems and Electronics design group to help rapid development of cutting-edge power conversion and electronics accessory product concepts, prototypes, and products. This position requires creativity and innovation to propose, prototype, and deliver new concepts and designs related to battery charging and grid tied inverters. Experience in hardware design, component selection, simulation, prototype assembly, testing and control is desired.

Duties & Responsibilities 5

Requirements & Skills 5

A minimum of Master Degree in Electrical Engineering with exposure to Power Electronics and Power Engineering.
Good engineering communications and documentation skills
Strong experience with power electronics design. Including: control and modulation techniques for power electronics, power electronics circuit modeling and simulation, magnetic component design and selection, switching device selection, testing and gate driver design, schematic drawing and PCB layout, basic thermal management and heat sink selection, hands on design and testing experience with kW level power electronics design and products, etc.
Experience with writing test plans, performing fault-finding, creating test jigs, generating reports, etc.
Experience with a variety of test equipment, including oscilloscopes, spectrum analyzers, environmental chambers, etc.
Relevant experience with analog circuits, micro-processor-based circuitry, etc.
- Basic knowledge in embedded firmware and C programming.
- Experience with Wide Band Gap devices and gate driver design.
- Experience with EMC testing (FCC/CE) and/or safety testing (CSA/UL) is considered an asset.

Job summary 6

The Electronics Engineer designs, tests, debugs and oversees the building of PCB electrical assemblies. This position supports product design by: improving product functionality, cost, quality, and manufacturability. The ideal candidate will possess creative problem solving skills, such as laying out circuits using components in an unconventional manner. This position must have excellent inter-personal skills to relay technical expertise to multiple departments.

Duties & Responsibilities 6

Requirements & Skills 6

Bachelor’s Degree in Electrical Engineering
2-5 years of direct working experience, a background with experience in RF circuitry and design is preferred
Proficiency using PCB CAD software, experience with Altium is preferred
- Comfortable using hand and light power tools as well as electronic test equipment
- Familiarity with programmable power supplies and loads
- Familiarity with Microsoft Office and Outlook

Job summary 7

An Electronics Engineer performs and supports development of engineering designs, models, and technical specifications for distribution FACTS devices, including application studies, software model development/testing and evaluation of reactive power coordinated control strategies.

Duties & Responsibilities 7

Requirements & Skills 7

Bachelor’s Degree in Electrical Engineering with 3 to 5 of experience with design of converters, inverters, FACTS devices and motor drives at low and medium voltage levels, or equivalent education and experience.
Advanced knowledge of electric power systems and equipment operation and control.
Advanced knowledge of circuit and system analysis using computer simulation tools (MatLAB, MathCAD, Simulink, PSpice, and others).
- Advanced interpersonal, communication, presentation and technical writing skills.
- Ability to work in a team environment and on several projects simultaneously.
- Advanced computer skills with emphasis on Microsoft Office products.

Job summary 8

We are looking for an Electronics Engineer to support the development and test of power electronics design and test for our Electric Propulsion Units.

Duties & Responsibilities 8

Be involved in power electronics engineering activities for the development, integration, and qualification of our electric propulsion systems
Use power electronics engineering skills to analyze existing circuits and assist in test and troubleshooting activities
- Support electrical stress analysis and reliability calculations activities
- With supervision, select and/or recommend components and topologies for inverter applications
- Follow established practices for recording BOM and configuration changes for engineering prototype hardware

Requirements & Skills 8

BS in Electrical or Electronics Engineering
At least 5 years of power electronics experience using common measurement and analysis tools, including DMMs, oscilloscopes, and related equipment
Experience with a broad array of engineering tools/languages, including SPICE and MATLAB
- Excellent organizational, planning, and follow-up skills
- Excellent oral and written communication skills, interpersonal skills, and ability to work effectively with others
- An attitude of curiosity and learning

Job summary 9

We are looking for an Electronics Engineer. This is a development engineering position which offers a significant opportunity for innovation and creativity. You will be working with a team introducing switch mode technology & latest state of the art in Electronic for use in motive and reserve power battery chargers. The initial project will involve studying then designing and implementing fan-less power converter and wireless charger circuit topologies.

Duties & Responsibilities 9

Power Converter System Modeling
High Frequency Magnetics Design
Power Converter Design with focus on High Power Density
Experience with the DSP for Power Converters
Simulations
- Collaborative Work in a Team Environment
- Report Generation
- Component Cost Studies

Requirements & Skills 9

Job summary 10

We are looking for an Electronics Engineer.

Duties & Responsibilities 10

Assist in the design and development of electronics engineered devices, equipment or systems using established criteria or specifications.
Assist in the inspection and evaluation of electronics engineered projects and resources
- Identify electronics engineering problems and recommend corrective action.
- Review technical electronics engineering project design documents, computations, and submittals.
- Prepare technical electronics engineering reports and studies with completeness, technical adequacy, and adherence to prescribed format of reports.

Requirements & Skills 10

Two year trial/probationary period may be required.
Must sign a mobility agreement if selected.
Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
Must be able to obtain and maintain a Secret security clearance.
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- Pursuant to EO 14043, all Federal employees, regardless of duty location or work arrangement, must be fully vaccinated for COVID-19 by November 22, 2021, or before entrance on duty if after November 22, subject to exceptions as required by law.
- If selected, the agency will provide information regarding what documentation is needed and how to request any legally required exceptions from this requirement.

Electronics Engineer Job Description

Job summary 1

Duties & Responsibilities 1

Requirements & Skills 1

Job summary 2

Duties & Responsibilities 2

Requirements & Skills 2

Job summary 3

Duties & Responsibilities 3

Requirements & Skills 3

Job summary 4

Duties & Responsibilities 4

Requirements & Skills 4

Job summary 5

Duties & Responsibilities 5

Requirements & Skills 5

Job summary 6

Duties & Responsibilities 6

Requirements & Skills 6

Job summary 7

Duties & Responsibilities 7

Requirements & Skills 7

Job summary 8

Duties & Responsibilities 8

Requirements & Skills 8

Job summary 9

Duties & Responsibilities 9

Requirements & Skills 9

Job summary 10

Duties & Responsibilities 10

Requirements & Skills 10

Start Using
100hires for Free

Weekly Webinars

Electronics Engineer Job Description

Job summary 1

Duties & Responsibilities 1

Requirements & Skills 1

Job summary 2

Duties & Responsibilities 2

Requirements & Skills 2

Job summary 3

Duties & Responsibilities 3

Requirements & Skills 3

Job summary 4

Duties & Responsibilities 4

Requirements & Skills 4

Job summary 5

Duties & Responsibilities 5

Requirements & Skills 5

Job summary 6

Duties & Responsibilities 6

Requirements & Skills 6

Job summary 7

Duties & Responsibilities 7

Requirements & Skills 7

Job summary 8

Duties & Responsibilities 8

Requirements & Skills 8

Job summary 9

Duties & Responsibilities 9

Requirements & Skills 9

Job summary 10

Duties & Responsibilities 10

Requirements & Skills 10

Start Using 100hires for Free

Weekly Webinars

Start Using
100hires for Free